Browse all practice questions for the UTA TRAX Light Rail Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

UTA TRAX Light Rail Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which elements should be included in a concise incident radio transmission?
  • In track layout, which device is used to establish a route from one track to another?
  • Which term describes the alignment of the switch points that allows straight or diverging moves?
  • Which term describes the push buttons used to request or cancel a route?
  • What is Fouling Point Mark?
  • What is a Bulletin?
  • What steps should you take when you encounter severe weather (wind, snow, ice) while operating TRAX?
  • What is the proper radio etiquette for TRAX operations?
  • During severe weather, why is it important to monitor signals and follow weather-specific safety procedures?
  • Trailing Movement through switches is defined as what?
  • Which statement best describes Single Track Operation?
  • What is a Signal Indication?
  • ABS abbreviation.
  • What safety considerations apply to performing safety-critical tasks on track?
  • What is the general right-of-way principle for TRAX trains at crossings and on-track segments?
  • What are General Announcements?
  • Which statement describes an Advisory?
  • What is an Auxiliary Track?
  • How should you communicate with the dispatcher during an incident?
  • Block, Manual refers to which of the following?
  • What is the function of a Switch?
  • Train:
  • What is the primary role of spotters in a rail yard environment?
  • Headway is defined as what?
  • What safety precautions are required when near third-rail or high-voltage equipment?
  • What is the purpose of a wayfinding/station stop communication with passengers?
  • Which statement describes Ballast?
  • ABS stands for which system?
  • In an emergency evacuation, what is your first action after stopping the train?
  • What is the indication of track occupancy when no train or vehicle is present?
  • What is a Switch Point Signal?
  • In interlocking terminology, fixed signals that protect the limits are also called what?
  • What does TCC stand for?
  • What additional precautions are required when operating in a rail yard?
  • What is a Block?
  • During an evacuation, after securing passengers and opening exits, what is the next priority?
  • Headway refers to what?
  • What term refers to the makeup of a train, including all LRVs and cars?
  • Which term describes the switches and tracks used to provide a route from one track to another?
  • Which speed category is not exceeding 15 MPH and requires stopping within half the range of vision?
  • What should you do if you observe unusual signals or erratic track conditions?
  • What is a Spring Switch?
  • Which term describes the overhead conductor that provides power to the LRV through direct contact with the pantograph?
  • Which option correctly describes the TRAX Control Center?
  • Why is adherence to the PTC system essential for TRAX operators?
  • What term describes the operator's compartment of an LRV?
  • Which term indicates the closest point to which a train may approach a switch?
  • A track switch which must be aligned for both facing and trailing point movements is known as what?
  • Which statement about Grade Crossing is true?
  • In rail operations, which term describes the pre-determined course of travel between interlockings or crossovers?
  • Which term represents the action of turning off electrical power to protect equipment and personnel?
  • Which statement about Yard Limits is true?
  • Why is it important to coordinate with maintenance before resuming service after an incident in the system?
  • Which term describes the protection of persons and equipment from movements on or near tracks?
  • Hi-Rail Vehicle is defined as which?
  • Which term stands for the device that controls braking functions?
  • Which term describes the number and identity of LRVs in a train?
  • What is the total time from the instant a train stops at a station for loading until it resumes moving?
  • What happens if a Train Operator fails to input within the designated time?
  • What does ATMS stand for?
  • Interlocking is described as what?
  • What is the correct approach to maintain a safe following distance behind the preceding train?
  • Which term refers to the device used to dispense tickets?
  • How should you deliver passenger safety announcements?
  • What term describes a qualified Employee assigned to a train or other on-track equipment where single-track protection is provided by an individual riding through the single-track area?
  • Which device is designed to cause rolling equipment to leave the rails to avoid fouling other tracks?
  • Which device must be held in the operating position and will bring the LRV to a stop if released?
  • What steps should you take to ensure safe boarding and alighting on a platform when doors are opening?
  • Who is described as a Flagger in railway operations?
  • Which option best describes Yard Track?
  • If you hear an unusual loud bang or crash while operating, what steps should you take?
  • Which statement best defines Yard Limits?
  • Who is the designated employee on duty in Control with authority over all movements on or affecting UTA tracks and property?
  • What should you do when a flashing red signal is displayed?
  • Which system provides power for LRVs and their auxiliaries?
  • Which statement best defines a Slow Zone?
  • Which component is responsible for braking control?
  • What is the function of the Train Monitoring System on LRVs?
  • Which option correctly defines the contact wire in an LRV system?
  • Which term refers to a physical joint designed to insulate electrical sections?
  • What is the standard procedure if there is an onboard camera or signaling equipment failure?
  • Which braking system is the ultimate level of slide-controlled braking derived from multiple independently controlled brakes and is recoverable?
  • How should braking performance be monitored during a trip?
  • What is the purpose of guard rail mounted to the inside of running rails?
  • Which type of signal is described as a low interlocking or block signal?
  • The Rule Book may be supplemented by what?
  • Who is defined as anyone employed by or under contract to the Utah Transit Authority (UTA)?
  • Which statement best defines a catenary in an LRV system?
  • Interlocking signals are also called which term?
  • Which of the following describes an Access Ramp?
  • What is the role of Positive Train Control (PTC) or automatic train protection in TRAX operations?
  • Traction Power System:
  • TCC stands for which term?
  • What is an Auxiliary Track?
  • What is a Signal, Fixed?
  • When communicating about a security concern, what should you provide if possible?
  • Where are the Route Selector push buttons located?
  • What does SOP stand for?
  • What term describes turning off electrical power to the catenary, messenger wire, and supporting equipment?
  • Which components govern the mainline operations?
  • If a Train Operator fails to input in the designated time, what occurs?
  • What are Running Rails?
  • Traffic, Reverse Direction of:
  • What is a Yard Lead?
  • Track Shunt:
  • Which statement describes the upper limit of the service braking for the LRV/train?
  • What is the Shop?
  • Facing Movement through switches is defined as what?
  • What does the Switch Position indicate?
  • What is the recommended action for personnel on the scene during a runaway situation?
  • Where is an island circuit located?
  • How can you maintain situational awareness when operating among dense pedestrian and vehicle traffic?
  • What are crossing gates?
  • What describes the connecting of two or more LRVs?
  • What is a Station?
  • What is a Signal, Block?
  • How should you respond if you notice a suspicious person near the track or train?
  • What is a Signal?
  • What term refers to established methods to perform a series of tasks?
  • When a signal displays a caution or warning aspect, what is the general rule for the operator?
  • A system of cameras and monitors attached to an LRV that enables Train Operators to observe the area next to the train to ensure safe movement is called what?
  • Why is backup lighting used during a traction outage?
  • What does Flagging Protection refer to?
  • What is the Rule Book?
  • Interlocking Limits are defined as what?
  • Which statement best defines an Accident?
  • Which term is a daily document providing system status to operate on the alignment?
  • How should you respond to a power outage or traction failure in terms of notifying others?
  • What is the correct sequence for operating the train doors at a Station Stop?
  • What term refers to an electrically operated locking device within signalized territory affixed to a manually operated switch or derail to control its use?
  • What is Ballast?
  • Which signal governs trains entering and using a block?
  • Which term describes the track designated for passenger or freight service that extends through yards and between stations?
  • What should you do to coordinate with dispatch during emergencies?
  • Push buttons contained in a box located adjacent to a signal used to request or cancel a route are called what?
  • What is a Yard Lead?
  • What are the steps for a standard stop at a station to ensure passenger safety?
  • How should you handle a door fault where doors fail to close properly?
  • Which device is used to throw and lock a switch and indicate its position?
  • Mainline refers to which track?
  • What actions should you take if you detect a track obstruction ahead?
  • The Employee in Charge (EIC) is responsible for the safety of persons and equipment working on or near the tracks and communicates with trains to monitor movement through the affected area. What is the term for this role?
  • Who is defined as a qualified Employee who controls the movements of a train?
  • Which term designates the maximum allowable speed as indicated by various signals and instructions?
  • Which term indicates a safety warning used to indicate that equipment has been de-energized for maintenance, repair, or other reasons?
  • What is the required approach to safety-critical tasks on track?
  • A safety warning method used to indicate that traction power substations or other equipment have been de-energized for maintenance is called what?
  • In the event of a stalled TRAX train, who should you notify?
  • What are the typical signs of a door operation fault you should report?
  • Which of the following is a characteristic of a fixed signal?
  • What is a Spur Track?
  • Which statement best describes the TRAX Control Center?
  • How should you secure the cab when parked to prevent unauthorized access?
  • What does the term Spot describe in rail operations?
  • What ADA accessibility requirements should you observe when assisting a passenger?
  • If you detect a track obstruction, what is the correct action sequence?
  • Light Rail Vehicle (LRV) is what?
  • Which term is the movement opposite to another train on the same track?
  • What is a Signal Aspect?
  • Which description BEST defines a Yard Track?
  • An Employee who is properly trained and certified and possesses the necessary licenses or certificates for duties is called what?
  • The Panic Brake is derived from a combination of independently controlled brakes including which of the following?
  • How do you perform a routine pre-departure inspection?
  • What defines Fouling Distance?
  • What term means to turn on electrical power to the catenary, messenger wire, and supporting equipment, at which time all devices connected are energized and live?
  • What does TCU stand for?
  • Which term denotes the time a train spends in a station for boarding and alighting?
  • Block, Manual describes which of the following?
  • What is the operator's primary responsibility before starting a TRAX trip?
  • If you encounter a green signal but there is an obstacle ahead, what should you do?
  • What is the purpose of the emergency braking system on a TRAX vehicle?
  • What is the purpose of the dead-man switch on a TRAX operator's control equipment?
  • After stopping at a flashing red signal, when may you proceed?
  • Which role is specifically responsible for safety in work areas on or near tracks and for coordinating train movements during operations?
  • Which term defines the area within 10 feet of the centerline or within 10 feet of any high voltage conductor or appliance?
  • How should you assist a passenger who requires wheelchair assistance at the platform?
  • During a fare compliance check, what is the recommended conduct for conductors?
  • If you encounter a track switch irregularity, what is the recommended immediate action if it is safe to stop?
  • Which option best describes the routine pre-departure inspection?
  • What is the proper response to a medical emergency on board?
  • Tail Track is best described as:
  • What does a green signal or proceed aspect indicate?
  • Which description best defines a Spur Track?
  • Which term describes the indication that a track is occupied even though no train is present?
  • An incident is defined as what?
  • What is a Frog?
  • Which device is located in advance of a switch or on the switch stand to indicate alignment?
  • Which option accurately describes a crossover?
  • Timetable is:
  • Which term describes a device for mechanically and electrically joining LRVs?
  • How should you use the train horn and warning devices?
  • What is a Deadman in LRV operation?
  • What are the key elements of a safe station stop to ensure passenger safety before departure?
  • What is the proper sequence for opening doors and boarding at a Station Stop?
  • Which term describes the ultimate level of non-slide braking achievable by the LRV/train, derived from a combination of independently controlled brakes including emergency friction brakes, track brakes, and sanding?
  • What is Fouling Point?
  • Block signals are also called what?
  • What is the correct procedure if a train encounters a door system fault at a station?
  • How should you secure a stalled TRAX train on a track?
  • How should you respond to an onboard medical emergency?
  • What should you do if you observe a track switch malfunction?
  • Operate on Sight means you should be prepared to stop within what?
  • Traffic, Normal Direction of:
  • Which statement describes the Advisory transmission process?
  • What is a Signal, Dwarf?
  • A pre-determined course of travel between interlockings or crossovers is known as what?
  • Which device is used to throw, lock, and indicate the position of a switch, consisting of a base, spindle, lever and connecting rod?
  • What is a Flag in railway terminology?
  • Which statement correctly identifies the TRAX Control Center?
  • An unforeseen condition that can result in injury to passengers or employees and/or damage to equipment and property is called what?
  • What is a pantograph in a light rail system?
  • What is the appropriate action regarding battery backup status indicators?
  • What steps should you take if a medical emergency occurs on board and you are trained to respond?
  • What is Full Service Braking?
  • Which of the following should you report as a potential track fault?
  • Operating Clearance is a document issued to whom?
  • Which term describes a device used to lock the position of a switch to prevent unauthorized changes?
  • What should you do when approaching a grade crossing with active warning devices?
  • During a power failure or traction outage on board the train, what is the correct response?
  • Tail Track is typically located near which location?
  • If you are instructed not to overtake a slower moving train ahead, how should you respond?
  • What device is used for mechanically and electrically joining LRVs?
  • When is it appropriate to communicate about a “runaway” or out-of-control situation?
  • Why is it important to report near misses and safety incidents even when no damage occurs?
  • What is a Bumping Post?
  • Which description most accurately defines a Spring Switch?
  • During a fare check, when is it appropriate to involve a supervisor?
  • The limits of UTA owned property including and adjacent to any track are defined by which term?
  • Which term corresponds to a device that controls traction power in trains?
  • Which term best describes a section of track whose use is controlled by signals?
  • What should you do if you detect smoke or fire on board?
  • What term describes a location where passengers board or alight Light Rail Vehicles?
  • What is the procedure for reporting a track switch irregularity or misalignment?
  • What describes a Grade Crossing?
  • How should you respond to a steady red traffic signal controlling a TRAX track segment?
  • What is a Signal, Hand?
  • Island Circuit is what?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy